LINED WORM GEAR CLAMPS
2582 Series
Constructed with all 300 grade stainless steel, lined worm gear clamps protect the hose surface and prevents silicone from shearing through band notches. The clamps are salt water resistant, making them an ideal solution for marine applications.
BENEFITS
- Recommended for Silicone Coolant Hose, Heater Hose, Marine, and Silicone Tubing
- Durable and Long Lasting
- Salt Water Resistant
APPLICATION
- For charge air connector (CAC) applications
CONSTRUCTION
- Lined clamps are designed for use with silicone rubber and other soft hose applications. The liner protects the hose surface and prevents it from extruding or shearing through the band notches as the clamp is tightened.
- Please call for availability
SPECIFICATIONS
- All 300 grade stainless steel lined worm gear clamps
- Hex Head: 5/16”
- Band Width: 9/16”
ORDER NOW
Manufacturer requires minimum order quantity
2582 SERIES: LINED WORM GEAR CLAMPS
| Part Number | Min. Dia.(in.) | Max. Dia.(in.) | Min. Dia.(mm) | Max. Dia.(mm) | PackSize | WeightLBS - Per 10 |
|---|---|---|---|---|---|---|
| FLX2582-0006 | 0.5 | 0.88 | 13 | 22 | 10 | 0.5 |
| FLX2582-0008 | 0.63 | 1 | 16 | 25 | 10 | 0.5 |
| FLX2582-0010 | 0.75 | 1.06 | 19 | 27 | 10 | 0.5 |
| FLX2582-0012 | 0.88 | 1.25 | 22 | 32 | 10 | 0.5 |
| FLX2582-0016 | 1 | 1.5 | 26 | 38 | 10 | 0.5 |
| FLX2582-0020 | 1.13 | 1.75 | 29 | 44 | 10 | 0.5 |
| FLX2582-0024 | 1.25 | 2 | 32 | 51 | 10 | 0.5 |
| FLX2582-0028 | 1.31 | 2.25 | 33 | 57 | 10 | 0.5 |
| FLX2582-0032 | 1.56 | 2.5 | 40 | 63 | 10 | 0.5 |
| FLX2582-0036 | 1.81 | 2.75 | 46 | 70 | 10 | 0.5 |
| FLX2582-0040 | 2.06 | 3 | 52 | 76 | 10 | 0.5 |
| FLX2582-0044 | 2.31 | 3.25 | 59 | 82 | 10 | 0.5 |
| FLX2582-0048 | 2.56 | 3.5 | 65 | 89 | 10 | 0.5 |
| FLX2582-0052 | 2.81 | 3.75 | 72 | 95 | 10 | 0.5 |
| FLX2582-0056 | 3.06 | 4 | 78 | 101 | 10 | 0.5 |
| FLX2582-0060 | 3.31 | 4.25 | 84 | 108 | 10 | 0.5 |
| FLX2582-0064 | 3.56 | 4.5 | 91 | 114 | 10 | 1 |
| FLX2582-0072 | 4.06 | 5 | 103 | 127 | 10 | 1 |
COOLANT AND HEATER HOSE CLAMPING INSTRUCTIONS:
Worm gear or constant torque type stainless steel clamps with inner liner are recommended for silicone heater and coolant hose. Initial clamp torque should be 40 inch-lbs. If re-torqueing is required, it should be limited to 20 inch-lbs. Do not use serrated, slotted, or wire type clamps.
